MEAN WELL Malaysia Indonesia Philippines Thailand Vietnam Europe & USA
MEAN WELL Malaysia Indonesia Philippines Thailand Vietnam Europe & USA MEAN WELL FEATURED BRANDS / LINE CARD Kuala Lumpur (KL), Malaysia, Thailand, Selangor, Damansara Supplier, Suppliers, Supplies, Supply | Optimus Control Industry PLT
Quantity
Looking for Mean Well products?

contact us today at: sales@optimuscontrol.com.my


AC/DC > Enclosed- Enclosed Switching Power Supply
>> G3 Series
full-meanwell-g3
Wattage: 15W ~ 150W
 
Features:
 
• Miniature size, non-PFC
• 5G vibration, 70°C operation
• 300VAC input surge
• Suitable for critical applications
• 2 outputs are isolated for RID series
Model
 
Single:
RS-15 / RS-25 / RS-35 / RS-50 / RS-75
RS-100 / RS-150
Dual:
RD-35 / RD-50 / RD-65 / RD-85 / RD-125
RID-50 / RID-65 / RID-85 / RID-125
Triple:
RT-50 / RT-65 / RT-85 / RT-125
Quad:
RQ-50 / RQ-65 / RQ-85 / RQ-125
>> NE Series
full-meanwell-ne
Wattage: 15W ~ 350W
Features:
• Economical non-PFC models
• Complete protections
• Complete safety certificates
Single:
NES-15 / NES-25 / NES-35 / NES-50
NES-75 / NES-100 / NES-150 / NES-200
NES-350
Dual:
NED-35 / NED-50 / NED-75 / NED-100
Triple:
NET-35 / NET-50 / NET-75
>> LRS Series
full-meanwell-lrs
Wattage: 35W ~ 350W
Features:
• Non-PFC, most economical models
• Ultra compact and 1U low profile
• 300VAC input surge
• No load power consumption: 0.2W ~ 0.75W
• 5G vibration, 70°C operation
• Operating altitude up to 5000 meters
• Complete safety certificates: IEC/EN60335-1(PD3), IEC/EN61558-1, -2-16; IEC/EN/UL60950-1 and GB4943
Model
 
LRS-35 / LRS-50 / LRS-75 / LRS-100
LRS-150 / LRS-150F / LRS-200 / LRS-350
>> SE Series
full-meanwell-se
Wattage: 100W ~ 1500W
Features:
• Non-PFC
• Economical medium to high power models
Model
 
SE-100 / SE-200 / SE-350 / SE-450
SE-600 / SE-1000 / SE-1500
>> PFC Series
full-meanwell-pfc
Wattage: 75W ~ 750W
Features:
• Built-in active PFC function
• Full range input, complete functions
Model
 
Single:
SP-75 / SP-100 / SP-150 / SP-200
SP-240 / SP-320 / SP-480 / SP-750
PSP-600
Triple:
TP-75 / TP-100 / TP-150 / TP-7503
Quad:
QP-100 / QP-150 / QP-200 / QP-320
QP-375
>> Moving Sign Series
full-meanwell-led_display
Wattage: 150W ~ 400W
 
Features:
 
• PFC: HSP, HDP series,
Non-PFC: HSN, NEL, ERP series
• Light weight and low profile
• HSP series—2.5V, 2.8V, 3.6V, 3.8V, 4.2V, 5V;
HSN series—4.2V, 5V;
NEL series—2.8V, 4.2V, 5V;
HDP series—V1: 2.8V, V2: 3.8V;
ERP series—24V, 36V, 48V
• Suitable for high efficiency moving sign applications
• Conformal coating (HSP, HDP, NEL, HSN series)
• Semi-potted and design against rain splash (ERP-350)
Model
 
Single:
HSP-150 / HSP-200 / HSP-250 / HSP-300
HSN-200 / HSN-300 / NEL-200 / NEL-300
NEL-400 / ERP-350 / UHP-200A
Dual:
HDP-190 / HDP-240
>> U-Bracket
full-meanwell-u-bracket
Wattage: 150W ~ 500W
 
Features:
 
• 1U low profile
• Built-in active PFC function
• Fanless design
Model
 
USP-150 / USP-225 / USP-350 / USP-500
>> RSP-75 ~ 500 Series
full-meanwell-rsp
Wattage: 75W ~ 500W
 
Features:
 
• 1U Low profile with active PFC function: 75W~320W: 30 mm, 500W: 40.5 mm
• Built-in constant current limiting circuit (RSP-75/100/150)
• Built-in remote ON/OFF control (RSP-75/100/150/500)
• Built-in remote sense (RSP-500 only)
Model
 
RSP-75 / RSP-100 / RSP-150 / RSP-200
RSP-320 / RSP-500
>> G5 Series
full-meanwell-g5
Wattage: 75W ~ 600W
 
Features:
 
• Built-in active PFC function
• High efficiency, no load power consumption < 0.5W ~ 0.75W
• 5 years warranty
Model
 
HRP-75 / HRP-100 / HRP-150
HRPG-150 / HRP-200 / HRPG-200
HRP-300 / HRPG-300 / HRP-450
HRPG-450 / HRP-600 / HRPG-600
>> MSP Series
full-meanwell-msp
Wattage: 100W ~ 600W
 
Features:
 
• Medical level, built-in active PFC
• Medical safety approved (MOOP level)
• High efficiency, no load power consumption<0.5W ~ 0.8W
• 5 years warranty
Model
 
MSP-100 / MSP-200 / MSP-300
MSP-450 / MSP-600
>> HEP Series
full-meanwell-hep
Wattage: 100W ~ 600W
 
Features:
 
• 90~305VAC with PFC
• Fanless design
• High efficiency up to 96%
• Wide working temperature range -55~+70°C (-40~+70°C for HEP-600)
• Rugged metal case with IP65 design (IP68 option available), withstand 10G vibration
• Operating altitude up to 5000 meters
• Suitable for high/low temperature, high dust, high moisture, high vibration, high salt outdoor or harsh environment
• 6 years warranty
Model
 
HEP-100 / HEP-150 / HEP-185
HEP-240 / HEP-320 / HEP-480 / HEP-600
AC/DC > DIN Rail- DIN Rail Power Supply
>> MDR Series
full-meanwell-mdr
Wattage: 10W ~ 96W
 
Features:
 
• Plastic case, ultra slim
• 1∅, full range input
• No load power consumption<0.75W~1W
• Assemble on industrial rail TS-35 / 7.5 or 15
• Built-in active PFC function
• DC OK signal output (MDR-10/20)
• DC OK relay contact (MDR-40/60/100)
• Class I, Div 2 Hazardous Locations T4 (MDR-40/60)
Model
 
MDR-10 / MDR-20 / MDR-40
MDR-60 / MDR-100
>> HDR Series
full-meanwell-hdr
Wattage: 15W ~ 60W
 
Features:
 
• Plastic case, step shape
• 1∅, full range input
• Compact size, 1SU~3SU width (DIN EN43880)
• Isolation class II
• DC output voltage adjustable
• No load power consumption <0.3W
• Assemble on industrial rail TS-35 / 7.5 or 15
• Suitable for building automation and control of household appliance
Model
 
HDR-15 / HDR-30 / HDR-60
>> DRA Series
full-meanwell-dra
Wattage: 40W ~ 60W
 
Features:
 
• Plastic case
• 1∅, full range input
• Io can be adjusted 10~100% by 1~10VDC, PWM signal or resistance
• Assemble on industrial rail TS-35 / 7.5 or 15
• Suitable for machine vision inspection system and plant cultivation applications
Model
 
DRA-40 / DRA-60
>> DR Series
full-meanwell-dr
Wattage: 15W ~ 100W
 
Features:
 
• Plastic case, step shape
• 1∅, full range input
• Isolation class II
• No load power consumption <0.5W~1W
• Assemble on industrial rail TS-35 / 7.5 or 15
• Suitable for building automation and control of household appliance
Model
 
DR-15 / DR-30 / DR-60 / DR-100
>> DR / DRP Series
full-meanwell-dr-drp
Wattage: 45W ~ 480W
 
Features:
 
• Metal case (except DR-45)
• 1∅, full range or 115/230 VAC or 230 VAC only input range by models
• Built-in active PFC function (240W~480W)
Model
 
1-phase:
DR-45 / DR-75 / DR-120 / DRP-240
DRP-480 / DRP-480S
>> DRH / DRT Series
full-meanwell-drh-drt
Wattage: 120W ~ 960W
 
Features:
 
• Metal case
• 2∅ or 3∅, 340~550 VAC input
• Fanless design
Model
 
2-phase:
DRH-120
3-phase:
DRT-240 / DRT-480 / DRT-960
>> EDR Series
full-meanwell-edr
Wattage: 75W ~ 150W
 
Features:
 
• Metal case, low cost
• 1∅, full range input
• Slim size, model width: 32 ~ 40mm
• EMC EN55022 class A
• Assemble on industrial rail TS-35 / 7.5 or 15
• 2 years warranty
Model
 
EDR-75 / EDR-120 / EDR-150
>> NDR Series
full-meanwell-ndr
Wattage: 75W ~ 480W
 
Features:
 
• Metal case, economical models
• 1∅, full range input
• Slim size, model width: 32 ~ 85.5mm
• EMC EN55022 class B
• Assemble on industrial rail TS-35 / 7.5 or 15
• 3 years warranty
Model
 
NDR-75 / NDR-120 / NDR-240 / NDR-480
>> SDR Series
full-meanwell-sdr
Wattage: 75W ~ 960W
 
Features:
 
• Metal case, slim size
• 1∅, full range input (230VAC only for SDR-960)
• 94% high efficiency and complete functions
• Built-in active PFC function (except SDR-75)
• Assemble on industrial rail TS-35 / 7.5 or 15
• Built-in DC OK relay contact (except SDR-75)
• 130%~150% peak load capability by models
• Current sharing function (SDR-480/960)
Model
 
SDR-75 / SDR-120 / SDR-240 / SDR-480
SDR-960
>> TDR Series
full-meanwell-tdr
Wattage: 960W
 
Features:
 
• Metal case, slim size
• 3∅, 340~550VAC input
• High efficiency up to 94.5%
• Built-in active PFC function
• Assemble on industrial rail TS-35 / 7.5 or 15
• Built-in DC OK relay contact
Model
 
TDR-480 / TDR-960
>> WDR Series
full-meanwell-wdr
Wattage: 120W ~ 480W
 
Features:
 
• Metal case, slim size
• 1∅ and 2∅ , 180~550VAC wide input
• High efficiency up to 93%
• Built-in active PFC function (240W & 480W)
• Assemble on industrial rail TS-35 / 7.5 or 15
• Built-in DC OK relay contact
Model
 
WDR-120 / WDR-240 / WDR-480
>> KNX Power
full-meanwell-knx
Wattage: 20W
 
Features:
 
• EIB/KNX power supply with integrated choke
• 30VDC/640mA
• Compact size with 3SU (52.5mm) width
• 1∅, 180~264VAC input
• No load power consumption <0.5W
• Assemble on industrial rail TS-35 / 7.5 or 15
Model
 
KNX-20E-640
>> Peripheral
full-meanwell-peripheral
Wattage: NONE
 
Features:
 
• 20A redundant module & 40A DC UPS module
Model
 
Redundant: DR-RDN20
UPS: DR-UPS40
AC/DC > Open Frame- Open Frame Switching Power Supply
>> Industrial - On Board Type
full-meanwell-industrial-on-board-type
Wattage: 1W ~ 60W
 
Features:
 
• Assemble on the main PCB of the system
• Miniature encapsulated type
• No load power consumption<0.075W~0.1W
• Working temperature:-30~+85°C by models
• Comply with EN55022 class B without any additional components
• Various styles: PIN, SMD, Screw terminal style
Model
 
IRM-01 / IRM-02 / IRM-03 / IRM-05
IRM-10 / IRM-15 / IRM-20 / IRM-30
IRM-45 / IRM-60
>> Industrial - Green PCB Type
full-meanwell-industrial-green-pcb-type
Wattage: 15W ~ 400W
 
Features:
 
• 3″ x 2″, 4″ x 2″, 5″ x 3″ complete sizes for choice
• PFC models: EPP, ELP series;
• Non-PFC models: EPS series
• No load power consumption <0.1W~0.5W
• Suitable for ErP regulated end systems
Model
 
2.5″ x 1.8″: EPS-15
3″ x 2″:
EPS-25 / EPS-35 / EPS-45S / EPS-65S
4″ x 2″:
EPS-45 / EPS-65 / EPS-120
EPP-100 / EPP-150 / EPP-200
5″ x 3″: EPP-300 / EPP-400
Others: ELP-75
>> Industrial - PCB Type
full-meanwell-industrial-pcb-type
Wattage: 5W ~ 250W
 
Features:
 
• PCB type, non-PFC for small wattage models
• Multiple form factors for different installations: 7″ x 4.25″, 5″ x 3″, 4″ x 2″, slim type
Single:
PS-05 / PS-15 / PS-25 / PS-35
PS-45 / PS-65 / PPS-125 / ASP-150
PPS-200 / LPS-50 / LPS-75 / LPS-100
LPP-100 / LPP-150
Dual:
PD-25 / PD-45 / PD-65 / RPD-65
PD-110 / PID-250
Triple:
PT-45 / PT-4503 / PT-65 / PT-6503
RPT-65 / PPT-125
Quad:
PQ-100 / PPQ-100 / PPQ-1003
>> Medical - On Board Type
full-meanwell-medical-on-board-type
Wattage: 5W ~ 20W
 
Features:
 
• Assemble on the main PCB of the system
• Medical safety approved (2xMOPP)
• Suitable for BF application with appropriate system consideration
Model
 
Encapsulated Type:
PM-05 / PM-10 / PM-15 / PM-20
PCB Type:
NFM-05 / NFM-10 / NFM-15 / NFM-20
>> Medical - PCB Type
full-meanwell-medical_pcb
Wattage: 30W ~ 300W
 
Features:
 
• Compact size, 3″x2″ for RPS-30/45/65; 4″x2″ for RPS-120/200
• PCB type, non-PFC for small wattage models
• Medical safety approved (2xMOPP)
• Low leakage current
• Suitable for BF application with appropriate system consideration for selected models
Model
 
Single:
MPS-30 / MPS-45 / MPS-65 / MPS-200
RPS-30 / RPS-45 / RPS-65 / RPS-120
RPS-200 / RPS-60 / RPS-75 / RPS-160
RPS-300 / RPS-400
Dual:
MPD-45 / MPD-65 / MPD-200
RPD-60 / RPD-75 / RPD-160
Triple:
MPT-45 / MPT-65 / MPT-200
RPT-60 / RPT-75 / RPT-160
Quad:
MPQ-200
AC/DC > Specific Purpose- Specific Purpose Power Supply
>> ATX PC Power
full-meanwell-atx-pc-power
Wattage: 250W ~ 300W
 
Features:
 
• Low profile for 1U/2U for rack system
• Suitable for industrial PC applications
Model
 
IPC-250 / IPC-300
>> Security-DIN Type
full-meanwell-security_din
Wattage: 40W ~ 100W
 
Features:
 
• With UPS function (need external batteries)
• Suitable for security industry or battery backup systems
• Assemble on industrial rail TS-35 / 7.5 or 15
Model
 
DRC-40 / DRC-60 / DRC-100
>> Security-Enclosed Type
full-meanwell-security_enclosed
Wattage: 35W ~ 155W
 
Features:
 
• With UPS function (need external batteries) for AD/ADD series
• Suitable for security industry or battery backup systems
Model
 
Single:
SCP-35 / SCP-50 / SCP-75
Dual:
AD-55 / ADS-55 / AD-155 / ADS-155
Triple:
ADD-55 / ADD-155
>> Security-PCB Type
full-meanwell-security_pcb
Wattage: 35W ~ 160W
 
Features:
 
• With UPS function (need external batteries)
• Suitable for security industry or battery backup systems
• Built-in active PFC function (PSC-160)
• Case available
Model
 
PSC-35 / PSC-60 / PSC-100 / PSC-160
AC/DC > PV Power- Programmable Power Supply
>> SPV Series
full-meanwell-spv
Wattage: 150W ~ 1500W
 
Features:
 
• Built-in active PFC function
• Output voltage programmable from 20~110%
• Built-in current sharing (SPV-1500)
Model
 
SPV-150 / SPV-300 / SPV-1500
>> RST Series
full-meanwell-rst
Wattage: 5000W ~ 10000W
 
Features:
 
• Single output power supply with 5000W / 10000W high wattage
• 3 phase input:3-wire / 196~305VAC or 4-wire / Y340~530VAC
• Built-in active PFC function
• High efficiency up to 91%
• 20000W with built-in parallel (active current sharing) function
• Output voltage and constant current level programmable
• 5 years warranty
Model
 
RST-5000 / RST-10000
>> RSP-750 ~ 3000 Series
full-meanwell-rsp
Wattage: 750W ~ 3000W
 
Features:
 
• Programmable high power with active PFC function
• Output voltage programmable
• Constant current level Icc programmable (RSP-750/1600 only)
• 1U low profile (41mm) : RSP-750/1000/1600/2000,
• 2U profile : RSP-1500/2400/3000
• Built-in current sharing (except RSP-750)
• 5 years warranty
Model
 
RSP-750 / RSP-1000 / RSP-1500 / RSP-1600
RSP-2000 / RSP-2400 / RSP-3000
AC/DC > Rack Power- 19″ Rack Power Unit
>> RCP Series
full-meanwell-rcp-series
Wattage: 1000W ~ 18000W
 
Features:
 
• Complete rack mountable front end solution: rectifier and charger
• 1U low profile
• 19 inch rack shelf available
Model
 
RCP-1000 / RCP-1600 / RCP-2000
Charger:
RCB-1600
Rack:
RCP-1U / RHP-1U / RKP-1U
Controller & Monitor:
RCP-MU / RKP-CMU1
AC/DC > Modular- Configurable Power Supply
>> MP Series
full-meanwell-mp-series
Wattage: 450W / 650W / 1000W
 
Features:
 
• Configurable/customizable/flexible power supply
• Built-in active PFC function
• 5 slot output for MP450/650,
• 7 slot output for MP1k0
• 75W/100W/150W/210W/300W/360W module available
Model
 
MP450 / MP650 / MP1K0
AC/DC > LED Driver- LED Driver
>> AP Series
full-meanwell-ap
Wattage: 8W ~ 35W
 
Features:
 
• 90~264VAC input
• Rectangular plastic case with IP42 level
• Class II design, without FG
• Low cost, small and compact size
• Constant voltage mode for APV series
• Constant current mode for APC series
• Suitable for indoor LED lighting and moving sign applications
Model
 
C.V.:
APV-8 / APV-12 / APV-16
APV-25 / APV-35
C.C.:
APC-8 / APC-12 / APC-16
APC-25 / APC-35
>> AP-E Series
full-meanwell-ap
Wattage: 8W ~ 16W
 
Features:
 
• 180~264VAC input only
• Rectangular plastic case with IP42 level
• Class II design, without FG
• Low cost, small and compact size
• Constant voltage mode for APV-E series
• Constant current mode for APC-E series
• Suitable for indoor LED lighting and moving sign applications
Model
 
C.V.:
APV-8E / APV-12E / APV-16E
C.C.:
APC-8E / APC-12E / APC-16E
>> CEN Series
full-meanwell-cen
Wattage: 60W ~ 96W
 
Features:
 
• 90~295VAC input, built-in active PFC function
• Metal case, IP66 design for indoor or outdoor installations
• User adjustable output voltage and current level
• Suitable for LED street lighting and outdoor LED lighting applications
Model
 
C.C.:
CEN-60 / CEN-75 / CEN-100
>> CLG Series
full-meanwell-clg
Wattage: 60W ~ 150W
 
Features:
 
• 90~295VAC input, built-in active PFC function
• Metal case, IP67/IP65 design for indoor or outdoor installations
• Output current adjustable through output cable or internal potentiometer (CLG-150)
• Suitable for LED street lighting, outdoor LED lighting and moving sign applications
Model
 
C.C.: CLG-60
C.V.+C.C.: CLG-100 / CLG-150
>> ELG Series
full-meanwell-elg-elg-c
Wattage: 75W ~ 240W
 
Features:
 
• 100~305VAC input range
• Built-in active PFC function
• No load/standby power consumption <0.5W
• Metal case, IP67/IP65 design for indoor or outdoor installations
• Function options:
output adjustable via potentiometer; 3 in 1 dimming (0~10Vdc or 10V PWM signal or resistance, dim-to-off); smart timer dimming; DALI; auxiliary DC output (ELG-150 BE-Type)
• Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries
• Suitable for LED street lighting and outdoor LED lighting
• 5 years warranty
Model
 
C.V.+C.C.:
ELG-75 / ELG-100 / ELG-150
ELG-200 / ELG-240
>> ELG-C Series
full-meanwell-elg-elg-c
Wattage: 75W ~ 240W
 
Features:
 
• 100~305VAC input range
• Constant current (C.C.) output
• Built-in active PFC function
• No load/standby power consumption <0.5W
• Metal case, IP67/IP65 design for indoor or outdoor installations
• Function options:
output adjustable via potentiometer; 3 in 1 dimming (0~10Vdc or 10V PWM signal or resistance, dim-to-off); smart timer dimming; DALI; auxiliary DC output (ELG-150-C BE-Type)
• Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries
• Suitable for LED street lighting and outdoor LED lighting
• 5 years warranty
Model
 
C.V.+C.C.:
ELG-75-C / ELG-100-C / ELG-150-C
ELG-200-C / ELG-240-C
>> ELN Series
full-meanwell-eln
Wattage: 30W ~ 60W
 
Features:
 
• 90~264VAC input
• Fully isolated plastic case with IP64 level
• Optional dimming function: 1.1~10VDC(D type) or PWM(P type) controlled
• Suitable for economical LED lighting and moving sign applications
Model
 
C.V.+C.C.: ELN-30 / ELN-60
>> FDL Series
full-meanwell-fdl
Wattage: 65W
 
Features:
 
• 180~295VAC input range
• Built-in active PFC function
• Constant current design
• Fully encapsulated with IP65 level
• No load power consumption <0.5W
• 3 years warranty
Model
 
CC: FDL-65
>> GSC Series
full-meanwell-gsc
Wattage: 18W ~ 40W
 
Features:
 
• 90~277VAC input, built-in active PFC function
• Constant current mode
• Fully isolated plastic case with IP40 design
• Class II design, without FG
• IEC320-C8 inlet for B type,
2 pole EURO plug for E type
• No load power consumption<0.15W
• Suitable for indoor LED lighting
Model
 
IEC320-C8:
GSC18B / GSC25B / GSC40B
EURO 2Pin:
GSC18E / GSC25E / GSC40E
>> HBG(P) Series
full-meanwell-hbg
Wattage: 60W ~ 240W
 
Features:
 
• Circular shape design:
HBG-60 : plastic case; HBG-100/160/240 : metal case; HBG-60P/100P/160P/240P : PCB type
• 90~305VAC input, built-in active PFC function [90~295VAC for HBG-60(P)]
• Circular shape design: HBG-60: plastic case, HBG-100/160/240: metal case HBG-60P/100P/160P/240P:PCB type
• IP67/IP65 design for indoor or outdoor installations for HBG-100/160/240
• Built-in 3 in 1 dimming function (1~10VDC, PWM signal, or resistance) for HBG-100(P)/160(P)/240(P) B type
• Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (HBG-100/160 only)
• Suitable for LED high/low bay lighting, stage lighting and spot lighting
• 5 years warranty
Model
 
Case:
HBG-60 / HBG-100 / HBG-160 / HBG-240
PCB:
HBG-100P / HBG-160P / HBG-240P
>> HLG Series
full-meanwell-hlg
Wattage: 40W ~ 600W
 
Features:
 
• 90~305VAC input, built-in active PFC function
• 96% high efficiency (HLG-600H)
• Metal case, IP67/IP65 design for indoor or outdoor installations
• Function options:
output adjustable via potentiometer; 3 in 1 dimming (1~10Vdc or 10V PWM signal or resistance); timer dimming
• Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries
• Suitable for LED street lighting, outdoor LED lighting and general outdoor applications with high IP requirement
• IP68/-55°C startup/10G vibration options available (Please contact JIANG for details)
• 7 years warranty
Model
 
C.V.+C.C.:
HLG-40H / HLG-60H / HLG-80H
HLG-100H / HLG-120H / HLG-150H
HLG-185H / HLG-240H / HLG-320H
HLG-480H / HLG-600H
>> HLG-C Series
full-meanwell-hlg-c
Wattage: 70W ~ 320W
 
Features:
 
• 90~305VAC input, built-in active PFC function
• Constant current output with high output voltage >60VDC
• Metal case, IP67/IP65 design for indoor or outdoor installations
• Function options:
output adjustable via potentiometer; 3 in 1 dimming (1~10Vdc or 10V PWM signal or resistance); timer dimming; smart timer dimming
• Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (HLG-240H-C/320H-C only)
• Suitable for LED street lighting and outdoor LED lighting
• 7 years warranty
Model
 
C.C.:
 
HLG-60H-C / HLG-80H-C
HLG-120H-C / HLG-185H-C
HLG-240H-C / HLG-320H-C
HLG-480H-C
>> HSG Series
full-meanwell-hsg
Wattage: 70W
 
Features:
 
• 90~305VAC input, built-in active PFC function
• Rectangular metal case
• IP65 design for indoor or outdoor installations
Model
 
C.V.+C.C.: HSG-70
>> HVG(C) Series
full-meanwell-hvg-c
Wattage: 65W ~ 320W
 
Features:
 
• Wide input range 180~528VAC
• Metal case, IP67/IP65 design for indoor or outdoor installations
• Built-in active PFC function
• Function options:
output adjustable via potentiometer; 3 in 1 dimming (0~10Vdc or 10V PWM signal or resistance, dim-to-off); timer dimming; smart timer dimming
• Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (except for HVG-65 and HVGC-65/100)
• Suitable for LED street lighting and outdoor LED lighting applications
• 5 years warranty
Model
 
C.V.+C.C.:
HVG-65 / HVG-100 / HVG-150
HVG-240 / HVG-320
C.C.:
HVGC-65 / HVGC-100 / HVGC-150
HVGC-240 / HVGC-320
>> LDB-L/LW Series
full-meanwell-ldb-l-lw-series
Wattage: 300 / 350 / 500 / 600mA
 
Features:
 
• Constant current DC/DC buck-boost LED driver
High efficiency up to 91%
• Comply with EN55015 and FCC part 15 without additional input filter and capacitors
• PWM dimming and remote ON/OFF control
• Suitable for buck-boost type lighting systems (additional mother board is required)
• Pin, wire style for choice
Model
 
Buck-boost: LDB-L
>> LDH Series
full-meanwell-ldh
Wattage: 350 / 500 / 700 / 1050mA
 
Features:
 
• Constant current output DC/DC step-up LED driver
• High efficiency up to 95%
• Comply with EN55015 without additional any components
• PWM+analog dimming and remote ON/OFF control
• Suitable for boost type lighting systems (Additional mother board is required)
• Pin, wire style for choice
Model
 
Step-up: LDH-45 / LDH-45-DA
>> LP Series
full-meanwell-lp
Wattage: 18W ~ 150W
 
Features:
 
• 90~264VAC input (except for 18W and 150W)
• Slim plastic case with IP67 level
• Economical design
• Withstand 300VAC surge input for 5 seconds (LPV/C-20/35/60/100)
• -30~70°C wide operation range
• Suitable for economical LED lighting and moving sign applications
• Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (LPVL-150 only)
Model
 
C.V.:
LPL-18 / LPH-18 / LPV-20
LPV-35 / LPV-60 / LPV-100
LPVL-150 / LPV-150
 
C.C.:
LPLC-18 / LPHC-18 / LPC-20 / LPC-35
LPC-60 / LPC-100 / LPC-150
>> OWA Series
full-meanwell-moistureproof-desktop
Wattage: 60W ~ 120W
 
Features:
 
• IP67 design for power body
• Class II design, without FG
• 2 pole USA plug (U type)/ EURO plug (E type)
• 90~264VAC input (180~264VAC input for OWA-120E)
• No load power consumption <0.15W
• Energy efficiency Level VI
• E-Type: meet CoC Version 5 (OWA-60E/90E); comply with EU ErP
U-Type: comply with EISA 2007/DoE and NRCan
• 5 years warranty
Model
 
USA 2Pin:
OWA-60U / OWA-90U / OWA-120U
EURO 2Pin:
OWA-60E / OWA-90E / OWA-120E
>> PCD Series
full-meanwell-pcd
Wattage: 16W ~ 60W
 
Features:
 
• 16W/25W: 90~135VAC or 180~295VAC 40W/60W: 180~295VAC
• AC phase-cut dimming, work with leading and trailing edge TRIAC dimmers
• Fully isolated plastic case with IP42 level
• Built-in active PFC function
• Class II design, without FG
• Constant current mode
• Suitable for indoor LED lighting
Model
 
C.C.:
PCD-16 / PCD-25 / PCD-40 / PCD-60
>> PLD Series
full-meanwell-pld
Wattage: 16W ~ 60W
 
Features:
 
• 16W: 90~135VAC or 180~295VAC
25W: 90~295VAC
40W/60W: 180~295VAC
• Built-in active PFC function
• Fully isolated plastic case with IP42 level
• Class II design, without FG
• Constant current mode
• Suitable for indoor LED lighting
Model
 
C.C.:
PLD-16 / PLD-25 / PLD-40 / PLD-60
>> PLM Series
full-meanwell-plm
Wattage: 12W ~ 40W
 
Features:
 
• 110~295VAC input (180~295VAC input for E type)
• Built-in active PFC function
• Fully isolated plastic case with IP30 level
• Class II design, without FG
• Push terminal I/O
• Constant current mode
• No load power consumption<0.5W
• Suitable for indoor LED lighting
Model
 
C.C.:
PLM-12 / PLM-25 / PLM-40
>> ULP Series
full-meanwell-ulp
Wattage: 150W
 
Features:
 
• 90~295VAC input, built-in active PFC function
• High efficiency up to 93%
• U-bracket low profile: 33mm, suitable for built-in LED lighting systems
Model
 
C.V.: ULP-150
>> ODL Series
 
Wattage: 45W ~ 65W
 
Features:
 
• Built-in active PFC function
• Constant current output mode
• Flicker free design
• Built-in 2 in 1 dimming function (0~10VDC or PWM signal, dim-to-off )
• Suitable for indoor LED lighting applications
Model
 
C.C.: ODLC-45 / ODLC-65
>> LPF Series
full-meanwell-lpf
Wattage: 16W ~ 90W
 
Features:
 
• 90~305VAC input, built-in active PFC function
• Fully isolated plastic case with IP67 level (16W optional)
• Class II design, without FG
• Built-in 3 in 1 dimming function for D type (1~10VDC, PWM signal or resistance)
• Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (LPF-90/90D)
• Suitable for LED lighting and moving sign applications
• 5 years warranty
Model
 
C.V.+C.C.:
LPF-16 / LPF-25 / LPF-40
LPF-60 / LPF-90 / LPFH-60
C.C. (3 in 1 Dimming):
LPF-16D / LPF-25D / LPF-40D
LPF-60D / LPF-90D / LPFH-60D
>> NPF Series
full-meanwell-npf
Wattage: 40W ~ 120W
 
Features:
 
• 90~305VAC input, built-in active PFC function
• Fully isolated plastic case with IP67 level
• Class II design, without FG
• No load/standby power consumption<0.15W (<0.5W for D type)
• Built-in 3 in 1 dimming function (0~10VDC, PWM signal or resistance, dim-to-off ) for D type
• Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries [NPF-40(D)/-60(D)/-120(D) only]
• Suitable for LED lighting and moving sign applications
• 5 years warranty
Model
 
C.V.+C.C.:
NPF-40 / NPF-60 / NPF-90 / NPF-120
C.C. (3 in 1 Dimming):
NPF-40D / NPF-60D / NPF-90D
NPF-120D
>> PWM Series
full-meanwell-pwm
Wattage: 40W ~ 120W
 
Features:
 
• 90~305VAC input, built-in active PFC function
• Fully isolated plastic case with IP67 level
• Constant voltage PWM style output
• Class II design, without FG
• No load power consumption<0.5W
• Built-in 3 in 1 dimming function (0~10VDC, PWM signal or resistance, dim-to-off)
• Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (PWM-40/60/120 only)
• Suitable for LED strip lighting
• 5 years warranty
Model
 
C.V.:
PWM-40 / PWM-60
PWM-90 / PWM-120
>> PLC Series
full-meanwell-plc
Wattage: 30W ~ 96W
 
Features:
 
• 90~264VAC input, built-in active PFC function
• Fully isolated plastic case with screw terminal style of I/O
• Suitable for indoor LED lighting and moving sign applications
Model
 
C.C.: PLC-30 / PLC-45 / PLC-60
C.V.+C.C.: PLC-100
>> PLN Series
full-meanwell-pln
Wattage: 20W ~ 96W
 
Features:
 
• 90~295VAC input (90~277VAC for PLN-20), built-in active PFC function
• Fully isolated plastic case with IP64 level
• Suitable for indoor LED lighting and moving sign applications
Model
 
C.C.:
PLN-20 / PLN-30 / PLN-45 / PLN-60
C.V.+C.C.: PLN-100
>> HLN Series
full-meanwell-hln
Wattage: 40W ~ 80W
 
Features:
 
• 90~305VAC input, built-in active PFC function
• Fully isolated plastic case with IP64 level
• Built-in 3 in 1 dimming function (1~10VDC, PWM signal or resistance) for B type
• User adjustable output voltage and current level for A type
• Suitable for indoor LED lighting and moving sign applications
Model
 
C.V.+C.C.:
HLN-40H / HLN-60H / HLN-80H
>> LCM Series
full-meanwell-lcm
Wattage: 25W ~ 60W
 
Features:
 
• 180~295VAC input for 40W/60W, 180~277VAC input for 25W
Constant current mode
• Built-in active PFC function
• Multiple-stage output current level selectable by DIP switch
• Built-in 3 in 1 dimming function for non DA type (0~10VDC, PWM signal or resistance, dim-to-off)
• Built-in DALI interface and push dimming function for DA type
• Suitable for indoor LED lighting applications
Model
 
3 in 1 Dimming:
LCM-25 / LCM-40 / LCM-60
DALI Dimming:
LCM-25DA / LCM-40DA / LCM-60DA
>> LCM-U Series
full-meanwell-lcm
Wattage: 40W ~ 60W
 
Features:
 
• 90~132VAC input only
• Constant current mode
• Built-in active PFC function
• Multiple-stage output current level selectable by DIP switch
• Built-in 3 in 1 dimming function for non DA type (0~10VDC, PWM signal or resistance, dim-to-off)
• Built-in DALI interface and push dimming function for DA type
• Suitable for indoor LED lighting applications
Model
 
3 in 1 Dimming:
LCM-40U / LCM-60U
DALI Dimming:
LCM-40UDA / LCM-60UDA
>> IDL Series
full-meanwell-idl
Wattage: 45W ~ 65W
 
Features:
 
• Built-in active PFC function
• Constant current output mode
• Flicker free design
• Built-in 2 in 1 dimming function (0~10VDC or PWM signal, dim-to-off )
• Suitable for indoor LED lighting applications
Model
 
C.C.: IDLC-45 / IDLC-65
>> PLP Series
full-meanwell-plp
Wattage: 20W ~ 60W
 
Features:
 
• 90~264VAC input (90~277VAC for PLP-20), built-in active PFC function
• Suitable for built-in LED lighting systems
Model
 
C.C.: PLP-20 / PLP-30 / PLP-45 / PLP-60
>> IDP Series
full-meanwell-idpc
Wattage: 45W ~ 65W
 
Features:
 
• Built-in active PFC function
• Constant current output mode
• Flicker free design
• Built-in 2 in 1 dimming function (0~10VDC or PWM signal, dim-to-off )
• Suitable for built-in LED lighting systems
Model
 
C.C.: IDPC-45 / IDPC-65
>> HLP Series
full-meanwell-hlp
Wattage: 40W ~ 80W
 
Features:
 
• 90~305VAC input, built-in active PFC function
• Built-in 3 in 1 dimming function (1~10VDC, PWM signal or resistance)
• Suitable for built-in LED lighting systems
Model
 
C.C.: HLP-40H / HLP-60H / HLP-80H
 
AC/DC > LED Accessory – LED Accessories
>> DAP-04
full-meanwell-dap-04
Wattage: NONE
 
Features:
 
• 90~305VAC input
• Convert DALI signal to PWM signal
• 4 DALI addressable output channels
• Meet DALI standards(IEC62386-101,102,207)
• Suitable to use along with MEAN WELL’s AC/DC LED PSU with 3 in 1 dimming function
Model
 
DAP-04
>> SDP-001
full-meanwell-sdp-001
Wattage: NONE
 
Features:
 
• Smart timer dimming programmer
Model
 
SDP-001
>> SPD-20
full-meanwell-spd
Wattage: NONE
 
Features:
 
• 20kA surge protection device
• Type 2 component assemblies
• Line to Ground & Line to Line protected
• Suitable for surge protection of LED drivers
• UL1449, TUV EN61643-11 approved
Model
 
SPD-20
>> WPD-06
full-meanwell-wpd
Wattage: NONE
 
Features:
 
• EnOcean wireless control technology
• Easy installation and configuration
• 6 protected and independent dimming output channels
• Up to 128 wireless batteryless switches
• Suitable for constant voltage lighting application
• Up to 30 meter wireless distances
Model
 
WPD-06
>> LED Strips
full-meanwell-led-strips
Wattage: NONE
 
Features:
 
• 12V LED Strips
• Uniform brightness, high stability
• Tailored length per application demand
Model
 
NCL-CL1-01 / IRL-CL2-01
IRL-RGBW-01 / IRL-RGB-01
>> RFP Series
full-meanwell-rfp
Wattage: NONE
 
Features:
 
• RF wireless remote control
• Adjustable brightness / color temperature / RGBW
• Suitable for LED strips application
Model
 
RFP-M1M3-3A / RFP-M2M3-3A
RFP-M5M3-3A / RFP-M8M4-5A
>> PIR-045
full-meanwell-pir
Wattage: NONE
 
Features:
 
• Built-in Passive Infrared sensor module
• MCU controller, no relay contact
• Adjustable off-time delay / dimming level / sensitivity
Model
 
PIR-045
>> POB Series
full-meanwell-pob
Wattage: NONE
 
Features:
 
• AC mains direct driving
• Systematic efficacy >100 lm/w @3000K
• CRI>80 ; PF> 0.95 ‧T.H.D. <20%
• Easy installation and configuration
Model
 
POB-30
 
AC/DC > Adaptor- External Switching Power Supply
>> Industrial - Desktop (Level V)
industrial_adaptor_v
Wattage: 18W ~ 280W
 
Features:
 
• Energy efficiency level V (GS series)
• No load power consumption <0.3W~0.5W
• Comply with EISA 2007, NRCan, MEPS and ErP
• Fanless design with 0~50°C working temperature
• A type: Class I (with FG), IEC320-C14;
• B type: Class II (no FG), IEC320-C8
• DC plug changeable (MOQ may be required)
• 2 years warranty
Model
 
Class I:
GS18A / GS25A / GS40
GS60 / GS90 / GS120
GS160 / GS220 / GS280
Class II:
GS18B / GS25B
Triple:
P25A / P25B / P50A
>> Industrial - Desktop (Level VI)
industrial_adaptor_vi
Wattage: 15W ~ 280W
 
Features:
 
• Global safety certificates for GST series :
• UL, TUV, PSE, RCM, KC, SIRIM, BIS, EAC, BSMI, CCC
• Energy efficiency Level VI
• No load power consumption <0.075W~0.5W
• Comply with EISA 2007/DoE, NRCan, MEPS, ErP and CoC Version 5
• Fanless design with -30~+70°C working temperature
• A type: Class I (with FG), IEC320-C14;
B type: Class II (no FG), IEC320-C8
• DC plug changeable (MOQ may be required)
• 3 years warranty
Model
 
Class I:
GS15A / GST18A / GST25A / GST40A
GST60A / GST90A / GST120A
GST160A / GST220A / GST280A
Triple:
GP25A / GP25B / GP50A
Class II:
GS15B / GST18B / GST25B / GST36B
>> Industrial - Wall-mounted (Level V)
full-meanwell-industrial-wall-mounted-level-v
Wattage: 12W ~ 36W
 
Features:
 
• Energy efficiency Level V
• No load power consumption <0.3W~0.5W
• Comply with EISA 2007, NRCan, MEPS and ErP
• 0~50°C working temperature
• 2 pole USA (U type) / EURO (E type)
• DC plug changeable (MOQ may be required)
• 2 years warranty
Model
 
USA 2 Pin:
GS12U / GS18U / GS25U / GS36U
EURO 2 Pin:
GS12E / GS18E / GS25E / GS36E
>> Industrial - Wall-mounted (Level VI)
full-meanwell-industrial-wall-mounted-level-vi
Wattage: 5W ~ 60W
 
Features:
 
• Energy efficiency Level VI
• No load power consumption <0.075W~0.15W
• Comply with EISA 2007/DoE, NRCan, ErP and CoC Version 5
• -30~+70°C working temperature
• 2 pole USA plug(U type) / EURO plug(E type) / Interchangeable type for GE series
• Slim design for SGA series
• DC plug changeable (MOQ may be required)
• 3 years warranty
Model
 
Fixed (USA 2 Pin):
GS05U-USB / GS06U / GS15U
GST18U / GST25U / GST36U
Fixed (EURO 2 Pin):
GS05E-USB / GS06E / GS15E
GST18E / GST25E / GST36E
Slim (USA 2 Pin):
SGA12U / SGA18U / SGA25U
SGA40U / SGA60U
Slim (EURO 2 Pin):
SGA12E / SGA18E / SGA25E
SGA40E / SGA60E
Slim (CH 2 Pin):
SGA40CH
Interchangeable:
GE12 / GE18 / GE24 / GE30
>> Medical - Desktop (Level VI)
full-meanwell-medical-desktop-level-vi
Wattage: 18W ~ 220W
 
Features:
 
• Medical safety approved (2xMOPP), BF application(B type only)
• Energy efficiency Level VI (GSM06/18/25/36/40/60 5~9V: Level V)
• No load power consumption <0.1W~0.15W
• Comply with EISA/DoE, NRCan, ErP and meet CoC Version 5
• A type: Class I (with FG), IEC320-C14;
B type: Class II (without FG), IEC320-C8
• DC plug changeable (MOQ may be required)
• 3 years warranty
Model
 
Class I:
GSM40A / GSM60A / GSM90A
GSM120A / GSM160A / GSM220A
Class II:
GSM18B / GSM25B / GSM36B
GSM40B / GSM60B / GSM90B
GSM120B / GSM160B / GSM220B
>> Medical - Wall-mounted (Level V / Level VI)
full-meanwell-medical-wall-mounted-level-v-level-vi
Wattage: 6W ~ 36W
 
Features:
 
• Medical safety approved (2xMOPP), BF applications
• Energy efficiency Level VI (GSM06 and GSM18/25/36 5~9V for Level V)
• No load power consumption <0.075W~0.3W
• Comply with EISA/DoE, NRCan, MEPS, ErP and meet CoC Version 5
• 2 pole USA plug(U type)/EURO plug(E type) for GSM series, interchangeable type for GEM series
• DC plug changeable (MOQ may be required)
• 3 years warranty
Model
 
Fixed (USA 2 Pin):
GSM06U / GSM18U / GSM25U / GSM36U
Fixed (EURO 2 Pin):
GSM06E / GSM18E / GSM25E / GSM36E
Interchangeable:
GEM12I / GEM18I / GEM30I / GEM40I
>> Moistureproof - Desktop
full-meanwell-moistureproof-desktop
Wattage: 60W ~ 120W
 
Features:
 
• IP67 design for power body
• Energy efficiency Level VI
• No load power consumption <0.15W
• E-Type: EU ErP and meet CoC Version 5 (OWA-60E/90E);
• U-Type: EISA 2007/DoE and NRCan
• Class II (no FG)
• 5 years warranty
Model
 
USA 2Pin:
OWA-60U / OWA-90U / OWA-120U
EURO 2Pin:
OWA-60E / OWA-90E / OWA-120E
AC/DC > Charger- External Battery Charger
>> Adaptor Charger
full-meanwell-charger
Wattage: 30W ~ 330W
 
Features:
 
• Portable battery charger
• Green adaptor with charging function
Model
 
Green:
GC30B / GC30E / GC30U / GC120
GC160 / GC220 / GC330
Single:
PA-120 / PB-120 / PB-230
>> Green Desktop Charger
 
Wattage: 120W
 
Features:
 
• ENP: Level VI power supply, ENC: 3-stage programmable charger for lead-acid batteries
• AC input range selectable by switch
Model
 
Power: ENP-120 / ENP-180 / ENP-240 / ENP-360
Charger: ENC-120 / ENC-180 / ENC-240 / ENC-360
>> Desktop Charger
full-meanwell-desktop-charger
Wattage: 120W ~ 240W
 
Features:
 
• ESP: power supply,
ESC: charger for lead-acid batteries
• AC input range selectable by switch
Model
 
Power: ESP-120 / ESP-240
Charger: ESC-120 / ESC-240
>> Stationary Charger
full-meanwell-stationary-charger
Wattage: 300W ~ 1600W
 
Features:
 
• Chargers for lead-acid and Li-ion batteries
• 3-stage charging curve: PB-300/360, 2/3/8-stage charging curve: PB-600/1000, 3-stage charging curve suitable for harsh environment applications: HEP-600C
• Intelligent charger with programmable 3-stage charging curve: RPB-1600/RCB-1600
• 5 years warranty for RPB-1600/RCB-1600, 6 years warranty for HEP-600C
Model
 
3 stage: PB-300 / PB-360
2/3/8 stage: PB-600 / PB-1000
Harsh Environment: HEP-600C
Programmable: RPB-1600 / RCB-1600
DC/DC > Enclosed Type – Enclosed Type
>> RSD Series
full-meanwell-dd_enclosed
Wattage: 100W ~ 300W
 
Features:
 
• Compliance with EN50155 and EN45545-2 railway standard
• 2:1 wide input range
• Isolation: 4000VDC
• 1U low profile
• Hald encapsulated
Model
 
RSD-100 / RSD-150 / RSD-200 / RSD-300
>> SD Series
full-meanwell-dd_enclosed
Wattage: 15W ~ 1000W
 
Features:
 
• 2:1 wide input range (4:1 for SD-500/1000)
• 1.5~2KVAC isolation by models
• 1U low profile (41mm) for SD-1000
• 12V/0.25A auxiliary output for SD-500/1000
• Built-in remote ON/OFF control and remote sense for SD-500/1000
Model
 
SD-15 / SD-25 / SD-50 / SD-100
 
SD-150 / SD-200 / SD-350
 
SD-500 / SD-1000
 
DC/DC > Module Type – Module Type
>> SMD Package
full-meanwell-smd-package
Wattage: 1W
 
Features:
 
• SMD type
• Single and dual output models
Model
 
Single: SBT01 / SFT01
Dual: DET01
>> SIP Package
full-meanwell-sip-package
Wattage: 1W ~ 5W
 
Features:
 
• Regulated and unregulated models
• ±10% or 2:1 wide input range
• On board module type, assemble on the main PCB of the system
Model
 
Regulated:
SPR01 / SPA01 / SPA02
SPB03 / SPB05
Unregulated:
SMU01 / SMU02 / SPU02 / SPU03
>> DIP Package
full-meanwell-dip-package
Wattage: 0.5W ~ 1W
 
Features:
 
• Regulated and unregulated models
• ±10% input range
• On board module type, assemble on the main PCB of the system
Model
 
Regulated: SRS
Unregulated: SUS01 / SMA01
>> DIP - 1.25`` x 0.8`` Footprint
dip-1-25-x-0-8-footprint
Wattage: 3W ~ 12W
 
Features:
 
• DIP24 package
• 2:1 (standard), 4:1 (option) wide input
• 1~1.5KVDC (standard), 3KVDC (option) isolation
• Single and dual output models
Model
 
Single:
SCW03 / SCW05 / SCW08 / SCW12
Dual:
DCW03 / DCW05 / DCW08 / DCW12
>> DIP - 1`` x 1`` Footprint
full-meanwell-dip-1-x-1-footprint
Wattage: 15W
 
Features:
 
• DIP package
• 2:1 wide input
• 1.5KVDC isolation
• Single output models
• Remote ON/OFF control, remote sense, trimming output ±10% by models
Model
 
SKM15
>> DIP - 2`` x 1`` Footprint
full-meanwell-dip-2-x-1-footprint
Wattage: 5W ~ 50W
 
Features:
 
• DIP package
• 2:1 (standard), 4:1 (option) wide input
• 1~1.5KVDC (standard), 3KVDC (option) isolation
• Single and dual output models
• Remote ON/OFF control, remote sense, trimming output ±10% by models
Model
 
Single:
SLW05 / SKE10 / SKA15
SKA20 / SKM30 / SKM50
Dual: DLW05 / DKE10 / DKA15
1″x1″: SKM15
>> DIP - 2`` x 2`` Footprint
full-meanwell-dip-2-x-2-footprint
Wattage: 15W ~ 60W
 
Features:
 
• DIP package
• 2:1 (standard), 4:1 (option) wide input
• 1~1.5KVDC isolation
• Single, dual and triple output models
Model
 
Single:
SKE15 / SDM30 / SKA40 / SKA60
Dual: DKE15 / DKA30
Triple: TKA30
>> Half-brick
full-meanwell-half-brick
Wattage: 75W ~ 150W
 
Features:
 
• Half-brick size (2.28” x 2.4” x 0.5”)
• DIP package
• 2:1 wide input range, 1.5KVDC isolation
• Built-in remote ON/OFF and remote sense
• 2.5V / 3.3V / 15V output available
• Optional heat sink available
Model
 
MHB75 / MHB100 / MHB150
DC/DC > On Board Type – On Board Type
>> NID Series
full-meanwell-nid-series
Wattage: 30W ~ 60W
 
Features:
 
• Non-isolated
• 3:1 wide input range
• High efficiency up to 96%
• Built-in remote ON/OFF control
• Economical open frame design
Model
 
NID30 / NID60
>> NSD Series
full-meanwell-nsd
Wattage: 5W ~ 15W
 
Features:
 
• 4:1 wide input range
• 1~1.5KVDC isolation by models
• Built-in remote ON/OFF contro
• Low cost, high reliability
Model
 
Single:
NSD05-S / NSD10-S / NSD15-S
Dual:
NSD10-D / NSD15-D
DC/DC > PCB Type – PCB Type
>> PSD Series
full-meanwell-dd_pcb
Wattage: 5W ~ 45W
 
Features:
 
• 2:1 wide input range
• 1.5~2KVAC isolation by models
Model
 
PSD-05 / PSD-15 / PSD-30 / PSD-45
DC/AC > Modified Sine Wave
>> A301/303 Series
full-meanwell-dcac_modified
Wattage: 100W ~ 2500W
 
Features:
 
• Modified sine wave output, suitable for resistive load
• Low cost
• 1 year warranty
Model
 
A300-100 / A300-150 / A300-300
 
A300-600 / A300-1K0 / A300-1K7
 
A300-2K5
 
 
 
DC/AC > True Sine Wave
>> TN Series
full-meanwell-tn
Wattage: 1500W ~ 3000W
 
Features:
 
• True sine wave with solar charger & by-pass function
• High surge power up to 200%
• Output voltage / frequency adjustable
• Conformal coating
• Computer-based monitoring software, recommended for Windows 7 and Windows 8 Operating System (English and Chinese version)
• 3 years warranty
Model
 
TN-1500 / TN-3000
>> TS Series
full-meanwell-ts
Wattage: 200W ~ 3000W
 
Features:
 
• True sine wave output, suitable for motor related applications
• High surge power up to 200%
• Output voltage / frequency adjustable
• Conformal coating (except for TS-200/400)
• 3 years warranty
Model
 
TS-200 / TS-400 / TS-700
 
TS-1000 / TS-1500 / TS-3000
 
>> IRC Series
full-meanwell-irc
Wattage: NONE
 
Features:
 
• Remote controller for TS-700~3000 , TN-1500~3000
Model
 
IRC1 / IRC2 / IRC3
 

Please leave your enquiry here, we will reply as soon as possible.

Switch To Desktop Version